Ready-mix concrete supply
Batched to your grade and delivered to site in our own mixers, timed to your pour schedule. Tell us the grade on your drawing and we batch to it.
Ready-mix concrete · Hassan, Karnataka
Building the future, one mix at a time
Unicon Infra supplies ready-mix concrete, on-site pumping and quality testing across grades M5 to M40. Tell us the grade, quantity and pour time, and we will confirm the mix and schedule the mixers.
Not sure how much you need? Use the volume estimator.
What we supply
One plant, one point of contact, and everything needed to get concrete from batch to pour.
Concrete pumping
Boom and line pumping for slabs, upper floors and sites the mixer chute can't reach directly.
Quality testing
Cube samples cast on site for 7-day and 28-day strength tests, so you have a record of what was poured. See our testing facilities.
Grades M5 to M40
From plain blinding concrete to heavily loaded structural columns. The grade guide shows where each one is normally used.
Quality testing facilities
We test the materials before they go into the mix, the concrete as it is poured, and the concrete after it has cured.
-
1 Before batching
Aggregates
-
Sieve analysis
Checks the particle-size grading of sand and aggregates, so the mix meets its design.
-
Specific gravity analyzer
Measures the specific gravity of aggregates, a key input when proportioning the mix.
-
-
2 At the pour
Fresh concrete
-
Slump cone analysis
Measures the workability of fresh concrete, so it places and compacts as intended.
-
-
3 After curing
Hardened concrete
-
Cube compression testing machine
Crushes cube samples at 7 and 28 days to confirm the concrete reaches its grade strength.
-
Hammer testing machine
A quick, non-destructive check of surface hardness on concrete already in place.
-
About Unicon Infra
Building the future, one mix at a time.
Unicon Infra batches ready-mix concrete at our plant in Hassan, and delivers it with our own mixers so the mix reaches site fresh and on schedule. Alongside supply, we offer concrete pumping and on-site quality testing, across grades M5 to M40.
We work with contractors, builders and homeowners on everything from a single slab to a full structural frame, and we're happy to talk through which grade and quantity suit your drawings before you order.
- Grades supplied
- M5–M40
- Testing facilities
- 5
- Ready-mix plants
- 2
Which grade do you need?
The number after M is the concrete's compressive strength in N/mm² after 28 days. Your structural drawings decide the grade. This guide shows where each one is normally used.
M25
General reinforced concrete
Select a grade. Taller means stronger.
How much concrete do I need?
Enter your dimensions to get the volume in cubic metres and cubic feet, and how many mixer loads it will take.
Enter the dimensions on the left to see how much concrete to order.
Order about
0 m³
0 cubic feet
- Volume from your dimensions
- Wastage and rounding
- Mixer loads
This is an estimate. Check quantities against your drawings and site conditions before you order.
How ordering works
Five steps from first message to finished pour. Book ahead for large pours so the plant can plan the mixers.
-
Share the details
Send the grade, quantity, site address and the time you want to start pouring. WhatsApp or a phone call both work.
-
Confirm the mix and price
We confirm the grade, slump and rate, and agree the pour schedule with you.
-
Batch and dispatch
Each load is batched to the agreed mix and leaves with a delivery challan showing the quantity and batching time.
-
Pour
Tell us your pour rate and we will space the mixers to match, so the pour stays continuous.
-
Test and close out
Cube samples can be cast on site for 7-day and 28-day strength tests. We then send the final bill.
Ask for a quote
Fill in what you know. The button opens WhatsApp with your message ready to send, or you can send it by email.